Nabkil Switchgear Studio — actual browser workflow
Source: https://design.nabkil.com/
Captured during real UI operation; idle gaps between recorded segments removed.

00:00:00.000 — 00:00:10.034
Open Manual design and choose the MDB workspace. This is an editable demonstration draft.

00:00:10.034 — 00:00:27.723
Select ACB, enter a 2500 A incomer and choose 3 poles. Press Enter to update the design.

00:00:27.723 — 00:00:33.382
Select Add feeder way to insert a new outgoing circuit into the manual design.

00:00:33.382 — 00:00:47.043
Name the circuit Demo feeder. Select MCCB and choose Fixed compartment mounting.

00:00:47.043 — 00:01:01.947
Enter 250 A trip and 250 A frame, keep 3 poles, and set quantity to 2. Press Enter to apply each rating.

00:01:01.947 — 00:01:12.564
Open Parts list. Next, change its basis from Attached reference to Current panel.

00:01:12.564 — 00:01:23.176
Choose Current panel so the parts list follows the equipment selected in this design.

00:01:23.176 — 00:01:33.589
Open BOQ to see the selected breakers, part numbers and quantities. Prices shown in this draft are provisional.

00:01:33.589 — 00:01:42.348
Open Quotation to review the commercial output from the current design. Confirm supplier prices before issuing a quotation.

00:01:42.348 — 00:01:50.464
The quotation carries the incomer and outgoing schedule, including the two 250 A demo feeders.

00:01:50.464 — 00:02:00.864
Select GA Elevation to review the switchboard arrangement, then expand the drawing area.

00:02:00.864 — 00:02:10.335
Enlarge the GA sheet to inspect the arrangement, then fit the complete drawing back into view.

00:02:10.335 — 00:02:19.021
In the program’s dedicated 3D viewer, choose the front camera, then return to an isometric view.

00:02:19.021 — 00:02:30.848
Open the equipment doors, then select Internal to reveal the breakers and busbar arrangement.

00:02:30.848 — 00:03:16.056
Drag the live model to rotate it and inspect the connections. The program’s engineering review notes remain visible.